You can either use a broom or a mop to wipe the floor tiles or a dry cloth if you are cleaning wall tiles. Do this before you start with the grout cleaning process to get rid of accumulated dust.

 

2. Apply cleaning solution to the grout and make sure all the crevices are covered. You may need to reapply the solution but be careful not to saturate the floor.

   

3. Leave the solution on for about half an hour. This will be just enough time to loosen stains and lift them off easier, too.

 

4. Scrub the grout clean with a brush with hard bristles. You could find brushes that are created specifically for this purpose at some DIY stores. You do not have to buy one though as any old toothbrush would work just as well. Just be careful to store it with other cleaning tools!

   

5. When you have removed all the dirt and stains, you can rinse your tile floor or wall with clean water. Dry the surface with a clean cloth.

  If there are any stubborn stains then you might need to repeat this process regularly for optimal outcome. If you are not into using store-bought chemical cleaners, you can opt for DIY cleaners using bleach or perhaps paste made of baking soda and a little water. For marble tiles, it is advisable to use a very mild dishwashing soap as acidic products can be damaging.]]>